ENKASONIC
Location: Home > Product > ENKASONIC

Specification

Country of Origin:
Material:
Thickness:
Density :
Color :

Fire :

Germany
Nylon 6 , Polyester facing
10mm
825 g/m2
Black mesh with grey facing
GB8627-2007

Installation

1. Check the floor smoothness,Clean the floor, cut the perimeter isolation strip into the appropriate size (Model: NOISESTOP® PEF3200), in general the height should be 20mm higher than the floor finish. Then, apply the glue at the back of isolation strip and adhere through wall.

2.Place Enkasonic over subfloor (or waterproofing membrane if applicable) with the black mesh down, white fabric side up. Tape sufficiently to prevent movement of the Enkasonic strips during construction.

 

3. After the Enkasonic is installed, place one layer of GRC board on top of the matting. Then, place a second layer of GRC board.

4.Install tongue and groove wood-floor on top of the floating 2-layer GRC board. Trim the excess PEF3200 perimeter isolation board. Apply sealant at the edge.

Illustration

Accessories

Environmental Requirement

Download

 

Address: 2F Po Cheong Comm.Bldg.,29 Prat Avenue,
     Tsimshatsui,Kowloon,Hongkong
Tel:(852)2367 3232
Web: http://www.aa-hk.com

Copyright © Jiangmen Jian Sheng Sheng Xue Cai Liao Co., Ltd All Rights Reserved.    粤ICP备17009887号